Military Fluids
Sales and Engineering:
mdamiani@radcolube.com
skotsios@radcolube.com
|
|
Military Fluids Sales and Engineering: mdamiani@radcolube.com skotsios@radcolube.com |
  Military Fluids
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Radco Industries, Inc. | Qualification Number: Not Applicable |
| PO Box 305 | Qualification Date: Not Applicable |
| LaFox, IL 60147 | Manufacturing Location: LaFox IL 60147 |
| Telephone: (800) 854-4865 | Fax: (630) 232-7968 |
Properties |
Test Method |
Limit |
Typical Result |
||||||||||||
| Physical: | |||||||||||||||
| Aniline Point °C | ASTM-D611 |
63-84 |
70.4 |
||||||||||||
| Color | ASTM-1500 |
0.5 max |
<0.5 |
||||||||||||
| Flash Point, Minimum °C | ASTM-D92 |
146 |
154 |
||||||||||||
| Interfacial Tension (@25°C) MIN | ASTM-D971 |
40 dynes/cm |
50 dynes/cm |
||||||||||||
| Pour Point °C Maximum | ASTM-D97 |
-40°C |
-61°C |
||||||||||||
| Specific Gravity, 15/15°C, Max | ASTM-D1298 |
0.91 |
0.8850 |
||||||||||||
Viscosity, max, cSt (SUS) at:
|
|||||||||||||||
| Visual Examination | ASTM-D1524 |
Clear and Bright |
PASS |
||||||||||||
| Electrical: | |||||||||||||||
Dielectric Breakdown Voltage @ 60 HZ:
|
|||||||||||||||
| Dielectric breakdown voltage, impulse, conditions, @ 25°C, needle-to-sphere grounded, 1 inch (25.4mm) gap |
ASTM-D3300 |
145 kV |
274 kV |
||||||||||||
| Gassing Tendency, max, uL/min | ASTM-D2300 |
+30 |
+12 |
||||||||||||
Power Factor, 60 HZ
|
|||||||||||||||
| Chemical: | |||||||||||||||
Oxidation Stability @ 72 hrs:
|
|||||||||||||||
Oxidation Stability @ 164 hrs:
|
|||||||||||||||
| Oxidation Stability (RBOT), min | ASTM-D2112 |
195 |
243 |
||||||||||||
| Oxdation Inhibitor content, max, % by mass | ASTM-D2668 |
0.3 |
0.27 |
||||||||||||
| Corrosive Sulfur | ASTM-D1275 |
Non-corrosive |
Non-corrosive |
||||||||||||
| Water, max, ppm | ASTM-D1533 |
35 |
15 |
||||||||||||
| Neutralization No, TAN, mg KOH/g | ASTM-D974 |
0.03 |
<0.01 |
||||||||||||
| PCB Content, ppm | ASTM-D4059 |
Not Detectable |
Not Detectable |
||||||||||||
Xceltherm® Electrical Insulating Oil (Type II) meets military standard specifications for electrical oil applications. Xceltherm® EIO-II has high electrical resistance and is both thermally and oxidatively stable. Xceltherm® EIO-II is intended for use in most common electrical insulating oil applications where normal oxidation resistance is required. It is compatible with other electrical insulating oils, including Shell Diala® A.
Xceltherm® is a trademark of RADCO INDUSTRIES, INC.
